Mercury Analog Encoders

Description

MicroE Systems’ Mercury Analog output encoders are smaller, higher performance, faster to install, and easier to use than any other encoder. Advanced features include SmartPrecision™ automatic offset and gain adjustments during set up to optimise accuracy. No manual adjustments are needed. The tiny sensor fits into very tight spaces, has broad alignment tolerances for fast and easy setup and works in both linear and rotary applications. The entire Mercury encoder system is EMI shielded for use in the toughest environments. With standard analog sine/cosine output, use your interpolation electronics to achieve the resolution required by your application.

Features

  • Small sensor with ultra-low Z height; flush screw mounting
  • Sensor is 8.4mm (H) x 12.7mm (W) x 20.6mm (L) and weighs 1.6g
  • SmartPrecision automatic offset and gain set up
  • Analog Sine/Cosine output and Index window
  • Fundamental resolution: Linear 20μm; Rotary 2,500 - 16,384 CPR Interpolated resolution determined by customer electronics: Linear: 20μm - 0.078μm; rotary: 2,500 to 4.2M CPR
  • Entire system is EMI shielded
  • Bi-directional index signal
  • Index mark at the center or end of the glass scale (linear)
  • Alignment Tool enables fast set up

 

Choose from the models listed below
 

Analog Output Systems

Mercury 1000 Models -

 

Mercury 1200 Models -